Each Building:
Size - 400ft. x 800ft.
8 Bays - 95ft. x 40ft.
Overhead Cranes - Three (3) 20 Ton Cranes per Bay

Pipe Fabrication Shop

Crawler Cranes:

Blast Profiler at both facilities is 2 to 2.5 mils.

Facility 1 (200ft x 60ft x 40ft Eave Height):

• (2) 10T O/H Cranes
• Blasting Equipment is a Pangborn
• Rotoblast Cabinet Model ES 1064
• Maximum Plate Size is 10ft x 65ft

Facility 2 (280ft x 60ft x 40ft Eave Height) :

• (2) 15T O/H Cranes
• Blasting Equipment is a Pangborn Rotoblast Cabinet Model ES 1552
• Maximum Sizes:
  Plate 10ft x 80ft
  Pipe 65ft dia. x 120ft (40T Max.)
  Girders 48in wide x 7in High

Equipment:

Rack is equipped with 4 covered submerged arc welding carriages

Capabilities:

• O.D. Range 12in to 132in
• Maximum Pipe Length 375 ft
• Maximum Weight 3,000 lbs/ft

Plate Cutter

Equipment:

• MG Industries Model 4500 Oxy-Fuel/Plasma
• NC Plate Cutting Machine with a semi-automatic Anderson Water Table 20ft x 90ft

Capabilities:

• Table can accommodate 4 - 10ft x 40ft Plates
• Plate burning up to 5in thick
• Direct feed to Plate Girder Line

K-Mills

Deck Leg Fabrication Shop

Equipment:

• Rack is equipped with five (5) covered submerged arc welding machine carriages.

Capabilities:

• O.D. Range 24in to 105in
• Maximum pile length on rack is 400 ft.
• Maximum weight on rack is 2,000 lbs./ft.

5 buildings with 9 Plate Rollers:

• Bertsch 20 (10ft cans) K2 Mill
• Bertsch 30 (12ft-4in cans) K1 Mill
• Bertsch 34 (12ft cans) Mill 3
• Bertsch 44 (12ft cans) Mill 4
• Hugh Smith 400 Ton Vertical (6ft cans) K2 Mill
• Hugh Smith 1200 Ton Vertical (10ft cans) Mill 3
• Hugh Smith 2000 Ton Vertical (10ft cans) Mill 3
• Hugh Smith 3000 Ton Vertical (10ft cans) Mill 3